Discover the world of MARK.

We are a reliable partner for many industries. The care and precision or our employees are found in every single one of our parts.
Our products
01

Markets and branches

We are a reliable partner for various industries. The care and precision or our employees are found in every single one of our parts. We are among the leading global companies in metal processing. With our precise and individual solutions, we are an important partner for various industries.

We value the highest quality and are certified according to ISO 9001: 2015, ISO 14001:2015 and ISO 45001:2018.

Mag. Hermann Hörtenhuber
TEL: +43 7563 8002-0

Automotive

We work closely with leading companies in the automotive industry. Our precision parts are used in various systems and modules, such as in gearboxes, braking systems (ABS/ESP), airbags, injection systems, automotive lamps, as hose couplings, or in motor management. In our development department, we work together with our customers on new solutions and products. If you have any questions, our employees are more than happy to be of assistance:

Automotive

Artikel: 7940

Tank nozzles made of stainless steel. All process steps carried out as tray goods.

Artikel: 2731

Spring bushing with nine sophisticated cross holes. Manufactured ready to use on transfer press.

Artikel: 7284

Special aluminium nut manufactured on the follow-on tool.

Artikel: 7121

Brass casing for temperature sensor. Manufactured on two-lane follow-on tool.

Artikel: 7273

Reference bushing for halogen lamp. Installation of the spring and cross stamping, as well as 100 % camera inspection on specialised machine.

Artikel: 7853

Thin-walled bushing made of non-corrosive material (1.4548) with many lateral processing steps like notches and cuts.

Artikel: 7276

Pressure piece: Bushings manufactured on follow-on tool, installation with spring on specialised MARK machine.

Artikel: 7295

Bushing for the adjusting mechanism of rear-view mirrors. Sophisticated flange geometry.

Artikel: 7296

Guide sleeve for brake hose replaces two-part solution. Asymmetrical flange geometry.

Artikel: 7595

Stainless steel valve bushing with downstream calibration work step reliably allows for roughness values of RZ 6.3.

Artikel: 7884

Deep-drawing part with difficult flange geometry.

Artikel: 7893

Valve sleeve with asymmetrical pipe connection. Automatic turning of the inner contour in order to reliably achieve a high roughness requirement 6.3.

Artikel: 7896

Valve sheath with cross holes manufactured on the transfer press ready to use.

Artikel: 7900

Casing for 12V plug.

Artikel: 7907

Deep-drawing part with hexagonal geometry. Ready to use on the transfer press.

Artikel: 3055

HC.air quick coupling for charge air tubes. Manufactured on 21‐step press. Installation and inspections on a fully automated machine.

Artikel: 7903

Housing with predetermined breaking point for airbag initiator. Made in the follow-on in large quantities.

Artikel: 7908

Threaded bushing for base plates made of plastic. Replace expensive turned parts. With internal thread and knurl. Overmoulded as inserts with double flange.

Artikel: 7136

Steel casing for solenoid valve. Made in the follow-on with many process steps (coating, 100 % inspection and automated, trace-isolating packaging after inspection).

Automotive

Mag. Hermann Hörtenhuber
TEL: +43 7563 8002-0
Artikel: 7940

Tank nozzles made of stainless steel. All process steps carried out as tray goods.

Artikel: 2731

Spring bushing with nine sophisticated cross holes. Manufactured ready to use on transfer press.

Artikel: 7284

Special aluminium nut manufactured on the follow-on tool.

Artikel: 7121

Brass casing for temperature sensor. Manufactured on two-lane follow-on tool.

Artikel: 7273

Reference bushing for halogen lamp. Installation of the spring and cross stamping, as well as 100 % camera inspection on specialised machine.

Artikel: 7853

Thin-walled bushing made of non-corrosive material (1.4548) with many lateral processing steps like notches and cuts.

Artikel: 7276

Pressure piece: Bushings manufactured on follow-on tool, installation with spring on specialised MARK machine.

Artikel: 7295

Bushing for the adjusting mechanism of rear-view mirrors. Sophisticated flange geometry.

Artikel: 7296

Guide sleeve for brake hose replaces two-part solution. Asymmetrical flange geometry.

Artikel: 7595

Stainless steel valve bushing with downstream calibration work step reliably allows for roughness values of RZ 6.3.

Artikel: 7884

Deep-drawing part with difficult flange geometry.

Artikel: 7893

Valve sleeve with asymmetrical pipe connection. Automatic turning of the inner contour in order to reliably achieve a high roughness requirement 6.3.

Artikel: 7896

Valve sheath with cross holes manufactured on the transfer press ready to use.

Artikel: 7900

Casing for 12V plug.

Artikel: 7907

Deep-drawing part with hexagonal geometry. Ready to use on the transfer press.

Artikel: 3055

HC.air quick coupling for charge air tubes. Manufactured on 21‐step press. Installation and inspections on a fully automated machine.

Artikel: 7903

Housing with predetermined breaking point for airbag initiator. Made in the follow-on in large quantities.

Artikel: 7908

Threaded bushing for base plates made of plastic. Replace expensive turned parts. With internal thread and knurl. Overmoulded as inserts with double flange.

Artikel: 7136

Steel casing for solenoid valve. Made in the follow-on with many process steps (coating, 100 % inspection and automated, trace-isolating packaging after inspection).

We work closely with leading companies in the automotive industry. Our precision parts are used in various systems and modules, such as in gearboxes, braking systems (ABS/ESP), airbags, injection systems, automotive lamps, as hose couplings, or in motor management. In our development department, we work together with our customers on new solutions and products. If you have any questions, our employees are more than happy to be of assistance:

Christian Mühringer
TEL: +43 7563 8002-0

Non-Automotive

Many industries rely on the precision of our parts. We supply companies in medical technology, electricity and electrical engineering, household appliances, construction industry, navigation systems, furniture industry, and many more. Do you have questions about our products or a specific idea which you would like to implement with us? Our employees are happy to assist:

Non-Automotive

Artikel: 7848

Lid made of stainless steel which is enclosed with a silicon membrane.

Artikel: 7849

Bushing made of non-corrosive material for refillable coffee capsules.

Artikel: 7875

Two pieces become one. Replaces the installation of a bushing with a stamping blank. Used in the construction industry with a nail for direct mounting on steel and concrete.

Artikel: 1671

Easy Roller. A high-quality product for the shoe industry, offers extraordinary ease of motion that facilitates lacing.

Artikel: 4920

Quick lock. Plastic part with metal part for the shoe industry, provides extraordinarily good hold for lots of wear and tear.

Artikel: 2890

Deep-drawn sleeve with inside thread for the household appliance industry.

Artikel: 7822

Stamped bent part for the cosmetic industry.

Non-Automotive

Christian Mühringer
TEL: +43 7563 8002-0
Artikel: 7848

Lid made of stainless steel which is enclosed with a silicon membrane.

Artikel: 7849

Bushing made of non-corrosive material for refillable coffee capsules.

Artikel: 7875

Two pieces become one. Replaces the installation of a bushing with a stamping blank. Used in the construction industry with a nail for direct mounting on steel and concrete.

Artikel: 1671

Easy Roller. A high-quality product for the shoe industry, offers extraordinary ease of motion that facilitates lacing.

Artikel: 4920

Quick lock. Plastic part with metal part for the shoe industry, provides extraordinarily good hold for lots of wear and tear.

Artikel: 2890

Deep-drawn sleeve with inside thread for the household appliance industry.

Artikel: 7822

Stamped bent part for the cosmetic industry.

Many industries rely on the precision of our parts. We supply companies in medical technology, electricity and electrical engineering, household appliances, construction industry, navigation systems, furniture industry, and many more. Do you have questions about our products or a specific idea which you would like to implement with us? Our employees are happy to assist:

Our Technologies

01
Read more Read more

Become a part of MARK

02
Read more Read more

Durch die weitere Nutzung der Seite stimmen Sie der Verwendung von Cookies zu. Weitere Informationen

Die Cookie-Einstellungen auf dieser Website sind auf "Cookies zulassen" eingestellt, um das beste Surferlebnis zu ermöglichen. Wenn Sie diese Website ohne Änderung der Cookie-Einstellungen verwenden oder auf "Akzeptieren" klicken, erklären Sie sich damit einverstanden.

Schließen